Custody Transfer Turbine Flowmeter 
http://www.rockwin.com/cttf-t.gif 

The Custody Transfer Series Inline Turbine Flowmeters are designed to provide high accuracy liquid flow measurement under exacting conditions encountered in Oil Industry.  

These are specifically intended for use in Fiscal or Custody Transfer Applications.  

 
 
http://www.rockwin.com/bullet.gif High Accuracy
http://www.rockwin.com/bullet.gif Viscosity Compensation
http://www.rockwin.com/bullet.gif Size ranging from 4" to 20" nominal bore
http://www.rockwin.com/bullet.gif Wide Flow Range
http://www.rockwin.com/bullet.gif Dual Pick-off for pulse security
 
 
http://www.rockwin.com/bullet.gif

General Specifications
 
   Flow Range 27 to 2700 M3/Hr
    Accuracy Linearity:+/- 0.15% of reading. 
    Maximum Pressure Rating According to flange specifications
    Pressure Drop (Approx.) 5lbf/in (0.30 kg/cm2) at 100% flow range under conditions SG=1, Viscosity=1cst
    Temperature -20°c to +150°C (with standard pick-off)  
For extended temperature range consult factory
    Minimum Output 25mV at 10% of flow range
    Electrical connections Conduit box with terminal block connections (conduit box specification dependent on certification requirements)
    Field Electronics A range of Pre-amplifiers, F/I converters and local display electronics is available.

http://www.rockwin.com/bullet.gif Model Selection

Model No.
Nominal Bore (Inch)
Normal Operating Range (m3/HR)
 Dimentions
X       Y
1100 CT
4
27 - 270
 254    356
1150 CT
6
55 - 550
 279    368
1200 CT
8
110 - 1100 
311    457
1250 CT
10 
190 - 1900 
336    457
1300 CT
12 
270 - 2700 
362    457
1400 CT
16 
450 - 4500 
419    610
1500 CT
20 
750 - 7500 
470    610